 |
 |
 |
|
”SKS 110”
BUTTERFLY VALVE – FEATURES |
|
SKS 110 design criteria & advantages
* Long service life with little or no maintenance.
* Simple mounting.
* Diameter range from 40mm to 800mm. (Larger diameter on
request)
* Easy automation, retrofit possible.
* Anil blow-out spindle.
* 100% Bi-directional tight shut off through centric valve disc
& shaft position.
* Symmetric valve disc and profile, therefore little pressure
loss
* Bearing supported shaft bottom for low torque requirement.
* Also suitable for high vacuum conditions.
* Mounting without any restriction as to the direction of flow.
* Minimal turbulence thanks to the streamlined valve disc.
|
| ---------------------------------------------------------------------------------------- |
 |
|
SINGLE
PLATE WAFER CHECK VALVE |
|
SKS wafer type check valve is an all-purpose check valve (NRV). The
valve are designed to API-594 and comply with API-598 valve
inspection testing standards. This design has distinct advantages
over conventional swing check valve.
* The lightweight and short face-to-face dimension of valve makes it
easy to install between gaskets and line flanges.
* It about 1/8th weight of conventional non return
valve.
Silent valve : water hammer & slamming almost eliminated.
* Lower pressure drop hence lower energy loss.
* Structurally sound.
* Flexible Installation. Can be installed in horizontal or in
vertical line without any special pipe support.
APPLICATION :
Water, Sewage, Seawater, Air, Steam, Oil & Gas
MATERIAL :
* Body & Disc : CI / CS / M.S / S.S / S.G. Iron
* Hinge & Stop Pin : M.S / S.S / or buyers Specification
* Seal : Nitrile, Neoprene, EPDM or Metal
* End Facing : Palin face, Raised face to Ring Joint facing.
* Size Range : 40mm to 400mm |
| ---------------------------------------------------------------------------------------- |
 |
|
AUTOMATIC AIRVENT |
|
The SKS 200/VIC Air vent valve is manufactured in accordance with
EN29000-ISO 9000 and can be used for domestic & commercial plumbing,
Industrial applications, heating, sanitary, pneumatic systems,
waterworks, hot water services, Condensate services etc. where air
pocket formation causes problems.
MAIN FEATURE :
The Air Vent allows the accumulated air in pipeline networks to
breathe out of the system thus removing air pockets and eventually
eliminating related problems such as noise , erratic water supply
etc.
SIZE : 3/8” & ½
PRESSURE : 10 Bar
TEMP : 110oC |
| ---------------------------------------------------------------------------------------- |
 |
|
PRESSURE REDUCING VALVE |
|
SPECIFICATION:
The SKS 102 & SKS 143 PRV is suitable for controlling the outlet
pressure of water in various applications such as before appliances,
sanitary, domestic & industrial plumbing requirements etc.
MAIN FEATURES :
Metallic brass diaphragm system for better pressure control . Size
1” & above have provision on both sides of the PRV to install
pressure gauges.
SKS 102 pressure reducing valves PN 10 (Sizes ½” & ¾”) have the
following parameters : Max inlet 10 bar
Outlet range 1-4 bar
Tested at 15 bar
SKS 143 pressure reducing valve PN 25 (Sizes 1” to 2- ½” ) have the
following parameters :
Outlet range 0.5-6 bars
Tested at 25 bar
Body : Forged brass, SEAL : Stainless steel, “O” Ring : NBR
ENDS : Screwed BSP femalends. |
 |
| ---------------------------------------------------------------------------------------- |
| |
|
| Home - Profile - Products - Contact - Enquiry |
